• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
  • Image 16
  • Image 17
  • Image 18
  • Image 19
  • Image 20
  • Image 21
  • Image 22
  • Image 23
  • Image 24

JMT Mobula6 HD Mobula 6 1S 65mm Brushless Bwhoop FPV Racing Drone with 4in1 Crazybee F4 Lite Runcam Nano3 Preorder Happymodel

From R2435.15
  • Color:


Buy With Confidence

100% Safe Payment


  • Description

    Happymodel Mobula6 Mobula 6 1S 65mm Brushless Bwhoop FPV Racing Drone with AIO 4in1 Crazybee F4 Lite Runcam Nano3 Drone


    Note: Order dealing time is about 15-20 days ,Pls don’t place the order if your mind it. Thanks!                                              there is mobula6 and mobul6 hd version, pls choose which one you like



    AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX

    Extreme light 1S 65mm Brushless whoop only 20g

    Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera

    Smooth and powerful

    Compatible for 1S Lipo/LIHV

    Camera Angle adjustable



    Brand Name: Happymodel

    Item Name: Mobula6 1S 65mm Brushless whoop drone BNF version
    Wheelbase: 65mm
    Size: 80mm*80mm*37mm

    Weight: 20g

    Receiver option:

    Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)

    Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)

    Motor speed option:

    SE0802 KV25000(Race Edition)

    SE0802 KV19000(Regular Edition)


    Package includes:

    Item Name


    Mobula6 1S 65mm whoop Drone Frame


    SPI Receiver Option1: Crazybee F4 Lite FC built-in Frsky SPI D8 RX


    SPI Receiver Option2: Crazybee F4 Lite FC built-in Flysky SPI RX

    SE0802 KV19000 or KV25000 brushless motor


    Gemfan 1219-3 Propellers(4cw+4ccw)


    Runcam Nano3 1/3 CMOS 800TVL camera


    5.8G 25mw 40ch vtx (Flight controller built-in)


    1S 300mah or 250mah 30C LiHV Battery


    1S Lipo/LIHV USB Charger


    Propeller disassemble tool









    Spare parts specifications:


    Mode: SE0802 19000KV or KV25000
    Stator Diamter:8mm
    Stator Length:2mm
    Shaft Diameter:Φ1mm
    Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
    No.of Cells(Lipo):1S only


    Gemfan 1219-3

    Center Thickness:5mm

    Prop Disk Diameter:31mm

    Center Hole Inner diameter:1.0mm


    Flight controller

    (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR

    (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
    MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    Sensor: MPU-6000(SPI connection)
    Board size: 28.5 * 28.5MM
    Power supply: 1S battery input (DC 2.9V4.35V)
    Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
    Built-in Betaflight OSD(SPI Control)
    Built-in 5.8G VTX
    Built-in SPI Frsky/Flysky receiver
    Built-in 5V 1A BEC
    Built-in voltage detection

    Onboard 4in1 ESC

    MCU upgraded to EFM8BB21
    Power supply: 1S LiPo/LiPo HV

    Current: 5A continuous peak 6A (3 seconds)
    Support BLHeliSuite programmable
    Factory firmware: O_H_5_REV16_7.HEX
    Default protocol: DSHOT600

    Onboard Frsky SPI D8 receiver Version

    SPI BUS receiver Frsky D8 compatible
    Compatible Non EU transmitter D8 model

    Channels: 8ch
    Failsafe support
    No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

    Onboard Flysky SPI receiver Version

    SPI BUS receiver
    Protocol: AFHDS and AFHDS-2A Switchable
    Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
    No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
    Failsafe support

    Onboard 5.8g VTX

    Output power: 25mw
    Frequency: 40CH
    Input voltage: 3.3V 5.5V
    Current consumption: 300mA(type)
    Frequency: 5.8GHz 5bands 40 channels
    With Race band 

    Smartaudio ready

    Runcam Nano3

    Model: RunCam Nano 3

    Image Sensor: 1/3″ CMOS

    Horizontal Resolution: 800TVL

    Lens : 2.1mm(M8) FOV 160°

    Signal System: PAL/NTSC Non Switchable

    S/N Ratio: >50dB

    Electronic Shutter Speed: Auto

    Auto Gain Control (AGC): Auto

    Min. Illumination: 0.01Lux@1.2F

    D-WDR: Auto

    Day/Night: Color

    Power:DC 3-5.5V

    Current: 110mA@5V  120mA@3.3V

    Housing Material: ABS

    Net Weight: 1.2g

    Dimensions: L14mm*W14mm*H9mm

    Lipo Battery

    Capacity:300mAh or 250mah
    Continuous Discharge Rate: 30C
    Size: 57mmx12mmx7mm
    Weight: 8g

    Connector: PH2.0




Follow us on:

Subscribe to our Newsletter
Please wait...